Automatic Stainless Steel Orange Juice Extractor/Citrus Juicer Machine 2000E-4(TAP)

Commercial Automatic Orange Juice Making Machine 2000E-4(TAP)

Instructions for use:

First, before operation

1. The power supply must have a safety grounding system, and the cable of the machine must not be replaced by itself.

2. Check whether the components are installed properly, especially if the mask is installed in place (whether the nut is pressed), otherwise it is difficult to start the device. This is very important.

Second, the operation process

1. Wash the oranges before adding juice and put them into the top box.

2. Connect the power supply and turn on the switch.

3. After the machine is running, the oranges can be continuously fed into the feed port, and fresh orange juice will flow out soon. The machine automatically peels the juice and filters the residue, and the peel is automatically transferred into the peel buckets on both sides.

Third, the use is completed

After daily use (such as restaurant juice bar, etc., it is snoring at night), it is recommended to wash thoroughly to ensure the cleanliness and taste of the next day.

1. The power must be cut off (unplug the plug), 2. Open the mask, 3. Remove the blade, peel the skin, bump the ball, thoroughly clean it, and scrub it with water. 3. After the completion, reinstall the above. Parts (remember, the mask must be in place) before it can be restarted.

Technical Parameters